Bobcat - 463 1.3 Tonne Skid Steer Loader
Specifications Of The Bobcat 463
The Bobcat S70 superseded the Bobcat 463 skid steer loader, which was produced between 2001 and 2008. The ability of the Bobcat 463 skid steer loader to perform tasks and activities that called for limited space was well known. Smaller construction equipment may be able to work in places that were inaccessible to larger equipment. With its rapid, compact, and efficient tilling, grading, and excavating capabilities, the Bobcat 463 may also be able to replace labourers.
Technical Specifications
The Bobcat 463 was powered by a three-cylinder, 1.0-liter, 22.5-horsepower Kubota D1005-E engine. Diesel fuel was used in the 61.1 cubic inch 463 engine. The Bobcat 463 has a hydrostatic transmission and four-wheel drive. Using hydraulics, the Bobcat 463's arms and bucket may be raised and lowered. Two hand levers were used to regulate the Bobcat 463's steering and speed.
Three weights could be transported by the Bobcat 463: 1,405 pounds of tipping weight, 700 pounds of rated working weight, and 2,708 pounds of operating weight. The Bobcat 463 has a top speed of 6.5 mph and comes with standard 5.7-inch by 12-inch tyres. The Bobcat also had a hydraulic pump that could move various attachments at a rate of 10 gallons per minute, including buckets, a utility grapple, and snow blowers.
With the bucket attachment added, the Bobcat 463 measured 100.8 inches; without it, it measured 75.5 inches. The Bobcat 463 had a width of 36 inches with a bucket attachment and 35.4 inches without. The hinge pin on the bucket was 94.5 inches above the ground, and the Bobcat was 71.4 inches tall. The Bobcat had a wheelbase of 28.4 inches and a turning circle of 61.3 inches.
The lift arm support, front and back lighting, operator cab, and front auxiliary hydraulics are just a few of the features the Bobcat offers. A top window, cab heater, key-less start kit, rotating beacon, suspension seat, and a reverse alarm were further possibilities. Backhoe, bucket, pallet fork, snow blower, trencher, angle broom, breaker, utility fork, and fork were a few of the 463's attachments.
Robs Digger Hire Oxfordshire Copyright© 2022 All Rights Reserved